How to CO2 service Aurotrap

Modified on Thu, 27 Feb at 9:27 AM

CO2 cartridge replacement in the Aurotrap device

Follow these steps to safely and effectively replace the CO2 cartridge in your Aurotrap:

Empty the CO2 by pulling the safety valve ring.
Unscrew the CO2 cartridge by turning it counterclockwise. Be cautious as any remaining CO2 will discharge from the top of the cartridge—wear gloves for safety.
Install the new CO2 cartridge by turning it clockwise rapidly to avoid CO2 discharging. Tighten the cartridge firmly.
Use the service function in the Aurotrap App under "Replacing CO2" to reset the counter.
Test the trap's kill mechanism by pushing a piece of paper through the rodent passage.

By completing these steps, your Aurotrap will be ready for continued effective operation.